Smart glass for curtain walls

Laminated glass with integrated PDLC film, in the make-up your project calls for. B-LOGIC controls it automatically, following the light: no blinds, no mechanical shading to maintain, a clean facade.

What we supply to facade contractors

  • Laminated smart glass. The PDLC film is laminated into the glass with UV-filtering EVA interlayers, in the make-up specified by the project, including structural glass.
  • Film for glass processors. Laminating film for companies that produce their own glass.
  • Adhesive film for retrofit. Turns existing glazing into active glazing without replacing the glass.
  • B-LOGIC control system for all three.

We install the film, not the glass: glazing is fitted by the specialist companies responsible for installation. We work alongside them as manufacturer or direct supplier.

What arrives on site

A ready kit, already configured:

  • the B-LOGIC node, configured by BrixiaTech before shipping with the installation data;
  • the film power supply, sized to the area it controls: up to 5, 10 or 20 m² per unit;
  • the light sensor;
  • access to the B-TWIN dashboard and the B-LOGIC Remote app.

The installer mounts, wires and connects the node to the building network. Power supplies go in a dry indoor space, including the ceiling void, within 25 m of cable from the glazing they control. Once powered, the system status is visible straight away in the dashboard.

A wired system that is easy to network

The node connects to the building network with an Ethernet cable, which can also carry power (PoE). No gateway is needed: just Internet access, with an outbound HTTPS connection to the B-LOGIC cloud.

For the people inside

  • Automatic: transparency follows the measured light.
  • Night: in the evening the film stays opaque, on a schedule you set.
  • Circadian: day-to-night transitions are gradual.
  • Manual: clear, opaque or any level in between, from the Android and iPhone app or the node's own page.

The building in 3D, from your drawings

The B-TWIN dashboard shows the building in 3D, with facades and zones. The model is built by uploading the project's DWG or DXF drawings.

Built to last

  • Remote updates, installed only if signed by BrixiaTech, with automatic rollback to the previous version.
  • Node designed in line with EN 18031-1.
  • Italian patent application no. 102026000027949 (patent pending).

Technical documentation for your project

Optical and solar values, available make-ups, reaction-to-fire requirements, specification texts: we assess them against your project data. Write to us and we will reply with the relevant documentation.

Working in facades or glass?

We work with facade contractors, glass processors and installers. Write to partner@brixiatech.com.

FAQ

Yes. With adhesive film, existing glazing becomes active without replacing the glass.
The specialist companies responsible for installation. We supply glass, film and control system, and install the film if required.
An Ethernet cable to the building network, with PoE or a separate power supply, and Internet access.